Make A Balloon Target Game

    Sponsored content provided by Resene

    It’s easy to create this colourful target game with a little bit of help from Resene.

    You will need:

    How to play:

    Each player must throw a small ball through each hole in the coloured balloon. The first player to get their ball through all the colours wins.

    32-balloon-target-game-step-1

    Step one

    Carefully drill five large holes in one of the pieces of plywood, as shown. Smooth any rough edges with sandpaper.

    32-balloon-target-game-step-2

    Step two

    Apply one coat of Resene Quick Dry to the pieces of plywood and allow to dry.

    32-balloon-target-game-step-3

    Step three

    Apply two coats of Resene Snap to the pieces of plywood, allowing two hours for each coat to dry.

    32-balloon-target-game-step-4

    Step four

    Join the pieces of plywood along the top edge using the hinges, spaced 50mm from each end.

    32-balloon-target-game-step-5

    Step five

    Paint one balloon with two coats of Resene Chaos and a second balloon with two coats of Resene Orang-atan, allowing two hours for each coat to dry.

    32-balloon-target-game-step-6

    Step six

    Paint a third balloon with two coats of Resene Fizz, allowing two hours for each coat to dry.

    32-balloon-target-game-step-7

    Step seven

    Paint a fourth balloon with two coats of Resene Kermit, allowing two hours for each coat to dry.

    Paint a fifth balloon with two coats of Resene Splish Splash, allowing two hours for each coat to dry.

    32-balloon-target

    Step eight

    Set up your target and play!

    Download a PDF of this project

    For more projects and colour inspiration visit Resene.co.nz.

    Resene Toys and Games with Mark Rayner – Project 32

    Read more on Kidspot:

    Leave A Comment